Drilled Slot Cast Iron Brake Disc Rear 330*12mm Aluminum Bell

Product Description

Jekit Cast Iron Brake Disc Rear 330*12mm aluminum bell

Because the braking system is very important to the life safety of the driver, if the braking system fails while driving, it will often lead to a major accident. It can be seen that regular inspection and maintenance of the brake system is very necessary.
In real life, some car owners attach great importance to the selection of the brake system configuration when purchasing a car, but in the later use of the vehicle, they often ignore the regular maintenance of the brake system until the car has "abnormal brake noise, deviation, control When the power is insufficient, the brake pedal is soft, the brake is abnormally worn, etc., it is only sent to the store for repair. In fact, if the car owner takes care of the braking system on weekdays, then these serious consequences can be easily avoided.
In addition to regular inspection and timely replacement of worn friction components, the brake system should also be regularly maintained:
Use a solvent-based cleaner to clean the surfaces of the brake friction components and their heat dissipation channels. Be careful not to use cleaning agents containing lubricating ingredients, and avoid soaking the rubber.
Use high-temperature (above 600°C) and impact-resistant lubricants in the mutual moving parts of the brake friction components to lubricate, assist heat dissipation and filling, and avoid eccentric wear. Be careful not to use lubricants that are not resistant to high temperature, such as butter, which will have the opposite effect once they are dried. [3]
Use high-temperature (above 600°C) and impact-resistant lubricants on the backside of the brake friction components, such as the muffler sheet, to eliminate brake squeal.
Use lubricant with high temperature resistance (above 120°C) at the positioning pin of the brake cylinder to ensure the effective time of the brake. Note that lubricants that are not resistant to high temperatures such as butter cannot be used.
Apply a long-term protective agent to the rubber boot of the brake cylinder and the rust-prone parts to protect the normal operation of the piston and ensure the effective time of the brake.
Apply a long-lasting lubricant to the joint surface of the tire rim and the car hub to avoid seizure.
Note that the braking system is related to the personal safety of the drivers and passengers. If incorrect products, counterfeit and shoddy products are used, or improper operation, it is very easy to cause accidents, so be sure to use a qualified service provider. , products of well-known companies, such as Jekit, to ensure safety