Car Brake Rear Enlarged Disc 324*10mm Bracket GT6 Backup Pads

Product Description

Jekit Car Brake Rear Enlarged Disc 324*10mm Bracket GT6 Backup Pads

product description

Car brake pads, also known as car brake pads, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheels. The friction linings and friction pads are subjected to external pressure and generate friction to achieve vehicle deceleration. Purpose.
Automobile brake pads are generally composed of steel plates, bonding insulation layers and friction blocks. The steel plates are coated to prevent rust. During the coating process, the SMT-4 furnace temperature tracker is used to detect the temperature distribution during the coating process to ensure the quality.

structure
The thermal insulation layer is composed of materials that do not transfer heat, and the purpose is to insulate. The friction block is composed of friction materials and adhesives. When braking, it is squeezed on the brake disc or brake drum to generate friction, so as to achieve the purpose of vehicle deceleration and braking. Due to friction, the friction pads will gradually wear out. Generally speaking, the lower the cost of the brake pads, the faster they will be worn. After the friction material is used, the brake pads should be replaced in time, otherwise the steel plate and the brake disc will be in direct contact, and eventually the braking effect will be lost and the brake disc will be damaged.

Buying Guide
When buying brake pads, pay attention to two choices
Four points of view - first, look at the friction coefficient. The friction coefficient determines the basic braking torque of the brake pads. If it is too high, it will cause wheel locking, loss of direction control and burning pads during the braking process. If it is too low, the braking distance will be too long;
Second, it depends on the safety. The brake pads will generate instantaneous high temperature during braking, especially during high-speed driving or emergency braking, the friction coefficient of the friction pads will decrease under high temperature conditions;
The third is to see whether it is comfortable, including braking feeling, noise, dust, smoke, odor, etc., which is a direct reflection of friction performance;
Fourth, look at the life, usually the brake pads can guarantee a service life of 30,000 kilometers.
Two choices - First, you should choose the car brake pads produced by regular manufacturers, with license numbers, specified friction coefficients, implementation standards, etc., and there should be a certificate of conformity, production batch number, production date, etc. in the packaging box;
Secondly, choose to go to a professional maintenance point and ask a professional to install it.

Maintenance
One: If you feel that the brakes are not as sensitive as before, just press the brakes a few times while waiting for the red light.
Two: Replace the air-conditioning filter element with a sponge of the same size, which not only increases the air intake, but also can be used after washing, and the car defrosts quickly in winter.
Three: Stick a layer of black felt cloth or flannel on the inner protective plate of the front wheel to reduce tire noise.
Four: Use pliers to reduce the gap between the connection of the wiper blade and the place where the rubber sheet is clamped, which can eliminate the vibration and noise of the wiper blade.
Five: Wipe the new bulb with alcohol to eliminate fingerprints and oil stains and prolong the service life of the bulb.
Six: Punch a small hole at the lowest point below the muffler to prolong the service life of the muffler.