CP5200 4 Pot Brake Kit 330*28mm Disc Drilled Slotted For Lexus IS300

Product Description

4 Pots Brake Kit CP5200 330*28mm Disc Drilled Slotted For Lexus IS300

There are two kinds of brake pad materials: metal brake skin and carbon ceramic brake skin. The brake pad is also called brake skin. In the automobile braking system, the brake pad is a key safety part. The brake pad plays a decisive role in all braking effects. The brake pad is generally composed of steel plate, adhesive insulation layer and friction block. The working principle of the brake is mainly from friction. The friction between the brake pad and the brake disc and between the tire and the ground is used to convert the kinetic energy of the vehicle into the heat energy of friction and stop the vehicle. A set of good and efficient braking system must be able to provide stable, sufficient and controllable braking force, and have good hydraulic transmission and heat dissipation capacity, so as to ensure that the force applied by the driver from the brake pedal can be fully and effectively transmitted to the master cylinder and each sub cylinder, so as to avoid hydraulic failure and brake recession caused by high heat.

How to choose the right car brake pads?

1. Select products with production license.

2. You can choose the matching brake pads according to your own model, try to buy pure supporting products from the stores directly sold by the manufacturer, or replace the brake pads at the designated automobile maintenance point.

3. The package of the product shall be intact, and the anti-counterfeiting mark and packaging mark shall be consistent with the mark on the brake pad. The outer packaging box shall be printed with the product model, specified friction coefficient, executive standard, etc., and the packaging box shall be provided with the certificate of conformity, production batch number, production date, etc.

4. The high-quality brake pad has uniform surface and fine overall process. The identification font of the non friction surface of the brake pad is clearly engraved. The printing color of the outer packaging box is bright without color deviation, and the paper is tough. Some packaging boxes are equipped with laser anti-counterfeiting labels.

5. The brake shoes (blocks) on the same axle must be replaced at the same time, and they must be the same kind of brake shoes (blocks) to maintain the consistency of left and right braking forces.

6. When purchasing brake shoes (blocks), check the product surface, and do not purchase products with defects such as oil stain, crack, blister and groove.