|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1set|
|Price:||factory direct price|
|Packaging Details:||Box Size 45*45*45cm|
|Delivery Time:||5-8 days|
|Payment Terms:||Western Union/Paypal, T/T|
|Supply Ability:||99 sets Every Month|
|Item Name:||AP9200 Brake Kit||Caliper Pots:||4 Pots|
|Disc Size:||355*28mm||Caliper Material:||Aluminum|
|Fit Wheel:||Rim 18 Inch||Disc Material:||Grey Cast Iron HT250|
|Center Cap Bracket:||Aluminum||Color:||Yellow|
AP9200 Front Car Brake Kit,
4 Pot Caliper 355*28mm,
AP9200 Car Brake Caliper Kit
Jekit Car Brake Kit Yellow Caliper 4 Pots 355*28mm Disc For Front
|Item name||4 pot car brake kit|
Vortex in the form of rapid cooling ,improve 40% of the braking effect
and brake friction performance.
|Full set included||
1 pair brake caliper/1 pair brake disc with center cap and bracket/
1 pair brake line/1 set brake pads
The car can only drive on the road because of the rotation of the wheels. What should we do when the car is about to stop? At this time, you have to rely on the brake device on the car to slow down and stop the car. The brake device generates friction between the brake pads and the wheel drum or disc, and converts the kinetic energy of the car into heat during the friction process and is consumed. Since the brake system is so important to a car, how do we maintain this important part?
Clean, high-quality brake fluid is the basis for safety and good brake system performance. You should buy a brake fluid of better quality on the market. If the brake fluid is dirty, drain and flush the entire system, then fill the master cylinder with new fluid. Do not reuse brake fluid. All brake fluid that has been drained from the system should be discarded.
Inhaling asbestos dust is very harmful to your health. When using a dry brush or compressed air to remove the dust and dirt on the brake system, the dust will be raised. As it easily contains asbestos fibers, it is easy to damage your health. Dust and mud should be dealt with with a vacuum cleaner that specifically removes asbestos, and the dustproof mode should be used. If you don't have a vacuum cleaner, you should maintain the brake assembly in a well-ventilated place and wear a certified anti-virus respirator.
Before checking the brakes, carefully wipe off the dirt on the main cylinder to prevent any dirt from falling into the oil storage tank. Remove the fasteners (usually pins) and covers. For cylinders with no scale, keep the liquid level 6 mm from the top of the cylinder. If there is a scale, just keep the liquid level higher than the scale. If the master cylinder needs to be refueled, please add heavy-duty brake fluid that meets DOT3 or 4 specifications.
The maintenance of the brake system is very important. The brake system of electric vehicles mainly uses brake fluid to transmit braking force, while large passenger cars and heavy trucks use pneumatic brake systems. There are also different maintenance methods for different brake systems:
For the air brake system, pay attention to frequently draining the accumulated water in the system and regularly replacing the dryer. The moisture in the air system will corrode the pipeline and affect the braking effect. In severe cases, it can even cause the brake system to fail. In addition, always check the working condition of the air pump and the wear of the air pump belt. If a problem is found, replace it in time.