China 6 Pot Brake Kit manufacturer

Cp9200 17In Front Wheel And Rear Brake Kit 330x28 Brake Rotor Kit Civic Golf Focus

Product Details:
Place of Origin: China
Brand Name: Jekit
Model Number: CP9200
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Factory price
Packaging Details: Box Size 45*45*45cm
Delivery Time: 5-7 days
Payment Terms: Western Union/Paypal
Supply Ability: 600 sets Every Month

Detail Information

Item Name: CP9200 Brake Kit Caliper Pots: 4 Pots
Disc Size: 330x28/355x28mm Caliper Material: Aluminum
Fit Wheel: Rim 17-18in Disc Material: Grey Cast Iron HT250
Center Cap Bracket: Aluminum Color: Black /Red/Yellow/blue /Custom Color
High Light:

Cp9200 Front And Rear Brake Kit 330x28

,

Rear Brake Kit 17In Wheel

,

Brake Rotor Kit 17In Wheel

Product Description

Civic Golf Focus front wheel 17 inch brake kit 330x28 rotor cp9200 caliper
 
 
Feature:
 
AP RACING CP9200
Big four piston caliper
Structure: two piece aluminum alloy forging
Applicable to 330mm * 28mm brake disc
Piston area: 49.56cm2
Net weight: 2.43kg
Brake pad area: 57.4cm2
Color: red, black
Scope of application: front wheels, 17 inch wheels, small and medium-sized vehicles, such as civic, golf, fox, etc

 
Brake pad:


Material: Ceramic graphite
Heat-resistant: 0-500 ℃
Friction Coefficient: 0.49

Rotor (disc+center bell):
Craft: By Forging
Plane Bounce: <0.03mm

 
Brake disc 


Material:
1.Disc:High Carbon Iron HT250
2.Center bell : Aerial 6061 Aluminum Alloy

 
Bracket:


Material: Aerial 6061 Aluminum Alloy
Craft: By Forging
Brake hose:
Material: Inside special rubber; Outside wrapped with steel cover knitted by steel wires

 
Caliper introduction

 

The piston data Inter parameter Screw specification
The piston size diameter type With brake disc diameter

Ø 330X28

/355X28mm

Oil pipe screw M10*1
Ø 41.16 47 Calipers lumen 30.6mm Caliper assembly screw M10*1.25
Ø 38.6 45 Caliper foot screw hole 10.1mm
    CD 46.86    
piston area 49.4 PL 60.36mm

 

 

AP caliper classification
 
Front wheel four piston caliper: Street version 7600 / 9200 / 8530 / 9540
Competitive 9444 / 9440 / 9448
Front wheel six piston caliper: Street version 9040 / 8520 / 9560 / 8520 / 21 / 22 9560 / 61 / 62
Competitive 9660 / 9665
Rear wheel two pistons: Street version 5317
Rear wheel four piston: Street version 7609 / 9202 / 8540 / 60 9541 / 42
Competitive Edition: 9449 / 50 / 51

 
 

How to choose the combination of front and rear brakes
 
1. Select according to hub size
J value and et value shall be considered at the same time. If the corresponding space of the hub is insufficient, it will interfere and cannot be installed. It is also forbidden to cut the caliper body / hub due to size problems, which is very dangerous.

 

2.Front wheel refitting idea
15 inch options: Street version 7600 and competitive version 9444
17 inch options: Street version 9200 and competitive version 9440
18 inch optional: Street version 9040 9540 8530 competitive version 9448 9660 9665
Wheels over 19 inches can be selected: Street version 8520 8521 8522 (referred to as 85 series, with different piston area of the same shape)
Street version 9560 9561 9562 (referred to as 95 Series, with different piston areas of the same shape)
 
3.Rear wheel modification idea (the front wheel shall be determined first, and then the corresponding ratio shall be made)
Front four pistons: 9200 8530 9540 rear two pistons: 5317
Front six pistons: 9040 rear four pistons: 9202 / 7609
Front six pistons: 8520 8521 8522 rear four pistons: 8530 / 8540 / 8560
Front six pistons: 9560 9561 9562 rear four pistons: 9541 / 9542
The collocation needs to follow the first six rear four front four rear two front big four rear small four (the car power needs to be distributed, and so does the braking force)
 

 

Our advantage:
 
1. Japanese technology, the price of Chinese factories
2. The price of the factory allows you to have enough profit
3. Custom ability, fast delivery
4. Professional supplier of performance auto parts. More than ten years of experience in auto parts technology, focusing on professionalism is worthy of your trust.

 
 
RFQ

 
If you need a complete modified caliper kit,Please contact customer service
Please provide:
1. What Car? What year?
2. Wheel hub size? For example, 18-inch 19-inch
3. Modified wheel hub or original wheel hub?
4.Can you give me the Chassis number or frame number(VIN number)?
The above information is used for accurate recommendation of products and accurate quotation
 
 
How to install the brake Kit
 

Step 1: clean the bearing. After removing the original brake system, clean the bearing part with a steel brush, remove the rust on it, and measure whether the bearing plane is deformed to ensure that the upgraded brake disc fits closely on the bearing.

 

Step 2: apply sound insulation adhesive to the bearing. Thin application of sound insulation glue on the bearing plane of the original factory can not only prevent the bearing from rusting, but also make the contact between the bearing and the brake disc closer.

 

Step 3: fix the brake disc. Place the brake disc on the bearing, but note that the screws in this part don't have to be tightened in a hurry. At this step, just fix it.

 

Step 4: install the axle code and caliper. After the brake disc is fixed, fix the bridge code on the sheep horn, and then fix the caliper on the bridge code to ensure the correct installation position of the bridge code, the correct installation direction of the bridge code and the correct installation direction of the caliper. This step is the same. There is no need to tighten the screws in a hurry, just fix them in a fixed position.

 

Step 5: accurate measurement of caliper position. In fact, this step is often the most easily overlooked, but it is also the most important step in the whole installation process. In the future use of many modified calipers, the uneven strength of left and right calipers, inconsistent wear of brake pads, and even brake jitter are related to this step. This step is to use an accurate vernier caliper to measure whether the caliper and the brake disc are accurately symmetrical up, down, left and right. On the premise of ensuring accuracy, the force pushed out by the piston can be evenly dispersed on the back of the brake pad, completely avoiding the problem of uneven left and right force, resulting in the failure of the caliper to work completely.

 

Step 6: tighten the screws correctly. After confirming the position of the caliper, the fixed screws need to be coated with screw glue. According to the requirements of the caliper manufacturer, use the correct torque wrench to fix the caliper screws. This is very important. Do not use an air cannon.

 

Step 7: install the brake pad + fixed pressing plate. The brake pads of different calipers are installed in different ways, so this step can also be advanced before the calipers are fixed. The more important thing here is to apply sound insulation glue, which can not only make the brake pads work more smoothly, but also reduce the probability of abnormal noise of the brake pads as far as possible. After installing the brake pad, the spring pressing plate at the top shall also be installed.

 

Step 8: installation of steel throat oil pipe. For refitting brakes, the importance of steel throat need not be said. It should be noted here that the steel throat with appropriate length shall be selected according to different models, and the steel throat with correct interface shall be matched according to the model of caliper.

 

Step 9: exhaust air from brake oil. This part is very important for the braking system. If the braking system contains air, it will lead to insufficient braking force at light level and loss of braking by directly depressing the pedal at heavy level. Here, I personally suggest using the special equipment for brake oil replacement to directly replace all brake oil. If the brake oil is very new, use the brake oil of the same brand and model to drain the pedal and replenish the oil.

 

Step 10: check oil leakage + confirm interference. After the air exhaust operation of brake oil, after a simple test run, stand for 30 minutes, and check whether there is oil leakage at the interface of brake oil pipe again. Once it is found, it must be handled immediately and the air exhaust operation must be carried out again. In addition, after lifting the car, turn the wheels left and right respectively, and observe whether there is any movement interference between brake calipers, bridge codes, screws, oil pipes and other parts, so as to ensure that there is no friction between these key parts and any parts of the body, and the oil pipes are not pulled. Only in this way can we ensure driving safety in the future.

 

Cp9200 17In Front Wheel And Rear Brake Kit 330x28 Brake Rotor Kit Civic Golf Focus 0

Cp9200 17In Front Wheel And Rear Brake Kit 330x28 Brake Rotor Kit Civic Golf Focus 1

Cp9200 17In Front Wheel And Rear Brake Kit 330x28 Brake Rotor Kit Civic Golf Focus 2

 
 
 

Get in touch with us

Enter Your Message

You Might Be Into These