|Place of Origin:||China|
|Model Number:||Brembo BM8|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Packaging Details:||Box Size 45*45*45cm|
|Delivery Time:||5-7 days|
|Payment Terms:||Western Union, T/T, Paypal|
|Supply Ability:||600 sets Per Month|
|Item Name:||BM8 Brake Caliper With Brake Pads||Caliper Pots Size:||8 Piston|
|Disc Size:||405*36mm/410*36mm||Caliper Material:||Alloy 6061 T6|
|Fit Wheel:||Rim 21-22 Inch||Car Model:||Audi A6|
|Caliper Color:||Red Caliper||Craft:||Forged|
|Front/Rear Wheel:||Front Rim|
Brembo BM8 Brake Caliper,
Alloy 6061 Brake Caliper,
Audi A6 Brake Caliper
Brembo BM8 Brake Caliper With Brake Pads Fit For Different Car Model
BRAKE CALIPER INSTALLATION TIPS
1.Double-check the caliper guide pins for proper torque. It’s important to tighten the caliper guide pin slide bolts to your vehicle’s recommended torque specification before completing the installation.
2.If your kit doesn’t include a caliper bracket, be sure to clean the original bracket thoroughly with brake parts cleaner and lubricate the guide pins with hi-temp caliper grease.
3.Use a brass wire brush and brake parts cleaner to remove any rust and brake pad residue from the bracket. Also, install new abutment clips if necessary.
4.Some applications call for replacing the brake hose-to-caliper crush washer. A new crush washer creates a tight seal that prevents leaks. Your vehicle’s service manual should explain when to do this.
5.Check the rubber dust boots that cover the base of the guide pins. Dust boots allow lubricant to escape and debris to enter the system if damaged or unsecured. This can lead to premature wear of the guide pins.
6.Use high-temp grease to lubricate the abutment clips in the areas where the brake pad backing plate makes contact.
7.Bleed your brake lines according to your vehicle’s service manual. Brake calipers have small orifices within them that can get clogged by debris that has accumulated in the system. Poorly maintained brake fluid absorbs moisture from the atmosphere. Over time, this causes rust to form. Bleeding the brake lines prior to installing new calipers removes the accumulated water and debris, which ensures proper function and maximum performance from your brakes.
8.Check your car’s service manual for the recommended torque specifications and double-check all fasteners. Be sure to pay special attention to bolts that call for thread-locker. Hi-temp thread locker fluid or paste is often used on these critical fasteners to ensure they do not back out due to the extreme stresses that brakes are subject to. Excessive heat, vibration, and torque can cause caliper bolts to come loose if they are not properly treated and torqued before use.
|Item Name||Brembo BM8 Caliper with brake pads|
|Pots number||Eight pots|
|Disc type||Drilled Slotted|
|Center Type||Floating Center Bell|
|Wheel Rim||Rim 20/21/22|