Brembo Or Ap Racing Brake Kit 6 Pots Customized Logo Color

Product Description

Bulk Order Brembo Or Ap Racing Brake Kit Can Customized Logo Color

In order to ensure the safety of the car and exert the ability of high-speed driving, the braking system must meet the following requirements
1. Good braking performance. The indicators for evaluating the braking efficiency of automobiles are: braking distance, braking deceleration, braking time
2. The handling is light and the directional stability is good when braking. When braking, the braking force distribution of the front and rear wheels is reasonable, and the braking force on the left and right wheels should be basically equal, so as to avoid deviation and sideslip when the car is braking.
3. Braking smoothness is good. When braking, it should be soft and stable; when releasing, it should be quick and thorough.
4. Good heat dissipation and easy adjustment. This requires the brake shoe friction plate to have strong high temperature resistance, fast recovery ability after being wet, adjustable clearance after wear, and dust and oil resistance.
5. With a trailer, the trailer can be braked before the main vehicle, and then the main vehicle can release the brake; when the trailer is disengaged by itself, it can brake by itself. Ensure good braking performance of the vehicle

A car with good braking performance is required to reduce the speed or stop quickly and promptly within a short time and distance through braking measures when driving at any speed. Good braking efficiency plays an important role in improving the average speed of the car and ensuring driving safety. The main measures to improve braking efficiency are: (1) Shorten braking distance:
During the use of the brake, due to the wear of the brake shoe friction pad and the brake drum, the brake clearance will gradually increase. The increased reaction time of the braking system will cause slow braking and insufficient braking force, prolong the braking distance and reduce the braking efficiency.
When braking, the amount of friction generated by the brake also depends to a large extent on the contact area between the brake shoe and the brake drum. The increase in the contact area, the faster the braking force increase time, the higher the braking efficiency and the better the braking effect. The distance is shortened accordingly. Under normal circumstances, when a large friction force is generated, the contact area between the brake shoe and the brake drum should reach more than 80%. In use, after the clearance increases due to the wear of the brake, it must be checked and adjusted.
(2) To prevent the brake from running off the track:
When braking, the car automatically deviates from the original driving direction. This phenomenon is called braking deviation. Once the brake deviates, it is easy to cause serious accidents such as collision, falling into a ditch or even overturning. In order to improve the stability of braking and ensure driving safety, during emergency braking, the car is not allowed to have obvious deviation phenomenon.
The main reason for the brake deviation is that the braking force of the left and right wheels of the front wheel is not equal. When braking, a rotational moment around the center of gravity is formed, which makes the car tend to rotate, so it is prone to braking deviation. In order to avoid deviation, during use, attention should be paid to keep the left and right wheel brake clearance and the brake shoe return spring tension consistent.
When replacing the friction plate, the same model and batch of products should be selected, and the machining accuracy and contact surface should meet the requirements. And prevent the friction plate from hardened layer, stained with oil, the brake drum is out of round or grooved.

Product introduction form