Custom Brake Disc Bell Black For 380*34mm Disc Rotor

Product Description

Jekit Factory Custom Brake Disc Bell For 380*34mm Disc Rotor

The front wheel brake disc can be installed in this way:

1. Open the spare wheel, loosen the fixing nut of the spare wheel, take out the spare wheel, move the spare wheel to the required position, and take out the jack, wrench and other onboard tools at the same time.

Suggestion: when changing the spare tire, the car should be parked in a safe place, and a reminder sign should be placed behind the car to ensure personal safety.

2. Use a wrench to initially loosen the nut of the tire to be replaced, and it is appropriate that the nut is loose enough to be easily disassembled.

Suggestion: the nuts of the original tire are usually screwed firmly. At this time, you can step on the wrench to exert force. When doing this step, both feet stepped on the wrench. When loosening and screwing nuts, operate in diagonal order.

3. Adjust the height of the jack, place the jack on the lower side beam of the vehicle body, and align the lifting claw of the jack with the support point of the lower side beam.

Shake the jack to support the vehicle body, and the tire should be 5cm above the ground. Then use a wrench to remove the loose nuts in turn and remove the tire.

Suggestion: the contact position between the jack and the vehicle body is a groove on the lower side beam of the vehicle, about 10cm away from the vehicle surface.

4. Align the spare tire with the axle and screw hole, and preliminarily tighten the tire bolts. At this time, pay attention to maintaining the angle of the tire so that the bolt is completely consistent with the tire.

Suggestion: the most important thing is to align the nut hole of the spare tire with the bolt. You can first stand the spare tire on the ground and adjust it to an approximately accurate angle, and then hold the outside of the spare tire with both hands to contact, adjust and place it, which can improve the efficiency.

5. Put down the jack and ground the spare tire. Tighten each nut in diagonal sequence. The process of changing the spare tire is over.

Suggestion: tightening the nut is very important, otherwise the spare tire may fly out when driving. Tightening the nut can still be done with the help of the sole of the foot. The spare tire is a temporary tire, which is only for the owner to get out of trouble. It cannot be driven for a long time. The owner should go to the 4S store or repair shop to replace the appropriate new tire as soon as possible. The hub cover comes down as soon as it is pulled.

Company Profile

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers.

FAQ

Q: Which countries are your products mainly sold to?

A: We maniny sell to Europe, UK, USA, Southeast Asia