365*34mm Brake Disc Bell Champagne Floating Center Cap For Golf

Product Description

365*34mm Brake Disc Bell Champagne Floating Center Cap For Golf

We jekit factory can make custom Brake disc bell for different car model

You can choose bell design: Floating/non floating/Flower. We have 6061 T6 and 7075 aluminum material to make brake disc bell

The center bell install on brake disc with floating bolts. We can assemble disc with disc bell before shipping

The floating brake disc slides freely on the axle pin matched with the support. When the piston extends and the inner brake pad contacts the brake disc, the brake caliper will float internally and the outer brake pad will also contact the brake disc, resulting in braking torque.

The function of the brake disc is to clamp the brake disc to slow down or stop. So it is essential for every car. Therefore, in case of brake disc failure during driving, it needs to be repaired in time. Prevent traffic accidents during driving.

We also sell complete set Brake system inncluding brake caliper/brake disc/brake pad/brake hose/caliper adapter

Just send me your car VIN code. We will check out if we have brake kit for your car

Brake cylinder

Determining the braking force of each wheel and the number of pistons (brake caliper) does not directly affect the braking force, but for a more linear braking feel. However, in order to adapt the multi piston brake caliper, it is necessary to match the larger brake disc than the original factory and the corresponding larger brake skin (increasing the contact area of the brake skin and the brake force arm), so as to increase the braking force.

Brake steel throat

Original brake throat rubber material when the brake system temperature rises, the plateau factory brake throat will be heated and expanded to reduce the transmission of brake fluid pressure. The steel throat can avoid the expansion of brake throat when the brake system is at high temperature, and the steel throat has higher corrosion resistance (high-temperature brake oil has strong corrosion force).

brake disc

The brake disc is generally divided into integrated disc, split disc and split floating disc. The simple understanding is that the heat dissipation is from poor to good. Both the marking disc and the perforated disc are designed to quickly scrape off the powder or water generated by the brake skin. The powder generated by the brake skin will cause rolling friction between the brake skin and the brake disc and reduce the braking efficiency. The same is true for the water. Heat dissipation of brake disc: (ventilation disc) the main heat dissipation of brake disc depends on the ventilation of the disc. Here, it should be noted that most ventilated brake discs are distinguished from the left and right (DBA mouse claws do not distinguish between the left and right). The wind guide strip in the ventilation disc uses high-speed rotation to throw out the hot air. The larger the brake disc, the greater the braking force will be provided for the whole braking system (the larger the brake disc will provide the greater the braking force arm).