Alloy 6 Pot Brake Kit Brembo GT6 355*32mm Drilled For Boxster 987

Product Description

6 Pot Brake Kit Brembo GT6 355*32mm Drilled Kit For Boxster 987

Modified suite list

Package introduction: a pair of six piston calipers, a pair of high-performance ceramic brake pads, a pair of perforated and enlarged discs, a pair of closed bridge positions (dog bones) for special vehicles, a pair of metal oil pipes (steel throat), and a bottle of brake oil.

How to install 6 pot brake kit?

Firstly, the caliper of the original vehicle needs to be removed. After the removal, the flange of the original vehicle shall be cleaned to prevent the putty adhesion of the original vehicle from affecting the modified braking effect.

In addition, when installing, the outer edge of the dust cover of the brake disc of some models may need to be manually corrected to prevent touching the brake disc.

When installing, the outer edge of the dust cover of the brake disc of some models may need to be manually corrected to prevent touching the brake disc.

After the brake disc is installed, check whether the screw hole position fits. If there is no problem, install the bridge code, and then install the caliper on the bridge code with an Allen wrench; Next, install the brake oil pipe (steel throat),; Then replace the new brake oil. When replacing the brake oil, someone needs to step on the brake pedal in the cab to eliminate the fuel consumption in the brake cylinder and oil pipe

After the installation of the retrofit kit is completed, it takes a period of running in period to make the running in of the new retrofit kit more fit, so as to really improve the braking effect.

The following is the design introduction of some high-performance brake discs:

Although the cost of split brake disc is high, it can reduce the weight of disc;

The ventilation hollow design of the ventilation disc is to reduce and average the temperature on the inside and outside of the disc;

The scribing design on the friction surface helps to lead away the brake powder generated during high-temperature friction, prevent them from staying between the brake skin and the brake disc, and reduce the friction coefficient;

The drilled brake disc has the functions of heat dissipation, weight reduction and leading away the brake powder, but it will reduce the friction area and affect the durability of the brake skin.

Some people directly replace the whole set of modification kit, while others are satisfied with a little improvement in braking performance in order to save costs. They only modify the enlarged plate.

However, it should be noted that not every car can be refitted

Product introduction