8520 6 Pot Brake Kit Caliper 360X36 Aluminum Rotor With Custom Color

Product Description

Jekit 8520 brake caliper-360X36 aluminum rotor with custom color

Brake pad maintenance

The braking effect of the vehicle is ultimately determined by the brake pads. Generally speaking, the normal service life of the brake pad is about 30000 km, but if it is used frequently in real life, it is also possible to change it once every 10000 km.
It is recommended that you check the brake pads every 5000 km. You should not only check the remaining thickness, but also check the wear status to see whether the wear degree on both sides is the same and whether they can return freely. If abnormal conditions are found, they should be handled immediately.

When the brake pad is worn to only about 5mm, the brake pad needs to be replaced, otherwise it will cause damage to the brake disc. When replacing brake pads, pay attention to the following points:

① It's best to replace the brake pads of the original car, because they have been used, the quality is guaranteed, and they are more compatible with the car's brake system, so the braking effect can be better played.
② After replacing the brake pad, be sure to step on several brakes to eliminate the gap between the shoe and the brake disc, so as not to cause the first foot not to brake and cause accidents.
③ The new brake pads need to be run in for 200km to achieve the best braking effect. Be careful during this period of time.

Brake disc maintenance

According to the 4S store, every time the brake pads are replaced twice, the brake discs of this wheel have to be replaced together. We can use this as a reference. We can judge whether to replace it by ourselves.

The surface of normal brake disc is smooth. If the brake pad is excessively worn but not replaced in time, it will damage the brake disc and make abnormal braking noise. Generally speaking, if there are scratches, it is not necessary to replace them, but if the abnormal braking noise still cannot be eliminated after replacing a new brake pad, it is recommended to replace the brake disc.

In addition, there are three small pits on the surface of most brake discs, and the pit depth is generally about 1.5mm. If the pits on both sides are worn flat on the surface, the brake disc is thinner than 3mm. At this time, the braking stroke will become larger and the braking force will become weaker. It is best to replace the brake disc to eliminate the hidden danger of driving safety.

In addition, oil stains, dirt and friction dust on the brake disc shall be cleaned frequently to ensure normal braking and heat dissipation of the brake disc and reduce braking noise.