Jekit 6 Pot Brake Kit With 355*32mm Disc For Front Wheel 19in

Product Description

Jekit 6 pot brake kit customized bell with 355*32mm disc kit for front wheel

Things to know before modifying the brakes

1. Thermal decay: The temperature of the brake pads will rise after the brake system of the car

is used for a certain number of times. After reaching a certain working condition temperature, the

braking effect of the brake system will reach the best, but the maximum limit is exceeded The

temperature, which causes the braking force to drop, eventually disappears completely. This is the

thermal attenuation of the brake.
2. Friction area: The friction coefficient refers to the ratio of the friction force between two surfaces

and the vertical force acting on one surface. When the brake pedal is stepped on, the piston in the

caliper will be pushed to generate pressure in the brake oil circuit. The pressure is transmitted to the

caliper piston via the brake fluid, pushing the brake pads to tighten the brake disc, and the brake disc

is forced to slow down through friction Rotate.

How to choose the right brake kit

Model selection: The larger the brake kit, the better. It is unscientific to simply pursue fullness. Each

brake has a brake master cylinder. If the output pressure of the brake master cylinder fails to reach the

mechanical performance of the caliper. So before buying brakes, you must understand whether the

brake accessories match.
Chassis number selection: Although the model of the same model is the same, the difference of the

chassis number will cause the value of the center circle of Yang Jiao to be different.
Matching the wheel hub: Because the size, shape, J value, ET value and X value of the wheel hub will

affect the installation space of the brake caliper, so if you want to modify the brake, you must pay great

attention to the match of the wheel hub, and this point is not very intuitive to refer to. Data standards

require specific installation and testing.
Type selection: The general modified brakes are divided into racing version and street version. If it is only

for daily driving, it is recommended to choose the street version.

How the brakes work

The current small cars basically use hydraulic braking, because the liquid cannot be compressed and can

transmit almost 100% of the power. The basic principle is that the driver steps on the brake pedal to apply

pressure to the brake oil in the brake master cylinder, and the liquid will The pressure is transmitted to the

piston of the brake caliper of each wheel through the pipeline, and the piston drives the brake caliper to

clamp the brake disc to generate huge friction to slow the vehicle.

Product introduction form