7075 Aluminum Brake Caliper Bracket 2pcs Aviation Materials

Product Description

Jekit Car Brake Parts Aluminum 6061 Bracket Color Customized

Product parameter

bracket Install

The role of bracket is to connect and fix the brake calipers, which needs to be specially designed for special vehicles. Most of the designs are reciprocal. Some products will be marked with the front and rear directions, but the left and right fixed directions are not marked. During installation, some people found that the installation could not be achieved based on past experience, thinking that it was a design problem of the product itself, so they carried out damage and transformation. In fact, most of the genuine bridge positions are accurately calculated, so you must first determine whether the installation position is correct.
The bearings are clean. After removing the original brake system, use a steel brush to clean the bearing part, remove the rust on it, and measure whether the bearing plane is deformed to ensure that the upgraded brake disc fits tightly on the bearing.
Apply sound-proof glue to the bearing. Applying a thin layer of soundproofing glue on the original bearing surface can not only prevent the bearing from rusting, but also make the contact between the bearing and the brake disc more tightly integrated.
The brake disc is fixed. The brake disc is placed on the bearing, but it should be noted that the screws in this part do not have to be tightened in a hurry, as long as this step is fixed.
Install bracket and calipers. After the brake disc is fixed, fix the bracket on the axle, and then fix the caliper on the bracket to ensure that the bracket is installed in the correct position, the bracket is installed in the correct direction, and the caliper is installed in the correct direction. This step is also the same, the screws do not need to be tightened in a hurry, just fix the position.
The main function of the bracket is to link the caliper to the axle and fix the caliper! The center bell and bracket of each car are matched together, but according to the different data design, there are 4 ways of bracket connection, front installation, reverse installation, front reverse installation, reverse front installation, and the bridge position can be changed by yourself. Other installation methods.

Advantages of Jekit

Jekit has a very large database of car models, specifically for designing car brake brackets. The bracket data needs to be very accurate and matched to be perfectly installed on the car. Because it has its own factory, Jekit has always had an advantage in making brackets. Many veteran brake companies do not have a full set of brake systems. Because of the complexity of the bracket data, the data will be different for different models. So when you need a bracket, please remember that Jekit is your best choice.

Reference picture