Aluminum 6061 Car Brake Bracket HV90 Customized Center Bell Bracket Bolts Kit

Product Description

Jekit Car Brake Parts Customized Center Bell Bracket Bolts Kit

Product parameter

introduce

The materials of center bell and bracket are mainly as follows: aluminum alloy 6061-T6, aluminum alloy T-7075, iron.
Aluminum alloy material has the characteristics of high strength, light weight and good heat dissipation. For the brake system, aluminum alloy material has a huge advantage, so aluminum alloy material is used in most cases.
6061-T6: Aluminum alloy accounted for 97.9%, magnesium accounted for 1%, silicon accounted for 0.6%, and 0.28% copper and 0.2% chromium (Chromium) were added.
T-7075: The main metal elements of aluminum and zinc accounted for 90% and 5.6% respectively, the others are magnesium, 2.5%, copper 1.6%, chromium 0.23%, and the remainder are silicon and manganese. , Titanium and other metal elements.
The strength of 7075 aluminum alloy is generally higher than that of 6061 aluminum alloy, and this is mainly because the content of aluminum alloy in 7075 aluminum alloy is nearly 8% less than the aluminum contained in 6061.
The iron material is the hardest among the three materials, but it can only be used for brackets. Usually used with aluminum alloy 6061-T6 center bell. Everyone must be familiar with iron. Iron brackets usually buy primary colors because iron cannot be oxidized and colored. Although iron is the hardest material, it is also very easy to rust. Therefore, after receiving the iron bracket, the general buyer will do some treatment to prevent rust.

6061-T6 Aluminum

The 6061 aluminum alloy bell and bracket is the most we sell, and it is also the most suitable material for living and using automobiles.
6061 T6 has high strength, high hardness (up to HV90 degrees or more), good processing effect, and good oxidation effect. There are no trachoma pores, and the flatness is better. Improve processing efficiency and reduce material costs. This will be the best choice for low-price, high-quality materials. The 6061-T6 series is an alloy of aluminum, magnesium, and silicon. It is a heat-treated corrosion-resistant alloy. The strength and corrosion resistance are relatively good, and the uniformity is good. The density of 6061 aluminum alloy is 0.0000028.
6061T6 aluminum has high strength, high hardness (up to HV90 degrees or more), good processing effect, and good oxidation effect. There are no trachoma pores, and the flatness is better. Improve processing efficiency and reduce material costs. This will be the best choice for low-price, high-quality materials. The 6061-T6 series is an alloy of aluminum, magnesium, and silicon. It is a heat-treated corrosion-resistant alloy. The strength and corrosion resistance are relatively good, and the uniformity is good.

Reference picture